|
|
News & information about the fast-moving world
of digital manufacturing, modeling & simulation
February 22, 2013
Volkswagen Launches Hyper-Efficient XL1
WOLFSBURG, Germany, Feb., 22 – Volkswagen has announced it will produce XL1 at its Osnabrück plant in Germany using carbonfiber technology. Volkswagen claims it to be the most aerodynamic production car ever, with a Cd of 0.19 and 261 mpg.
The XL1 from Volkswagen is the most fuel-efficient production car in the world, with a European combined fuel consumption rating of 261 mpg. Thanks to its plug-in hybrid system, this two-seat vehicle can also cover up to 32 miles as a zero-emissions vehicle in all-electric mode.
The XL1 is an automotive standout that follows pure sports-car design principles: light weight (1953 pounds), exceptional aerodynamics (Cd 0.19), and a low center of gravity. This super-efficient Volkswagen thus has the ability to cruise down the road at a constant 62 mph while using just 8.3 horsepower. In all-electric mode, the XL1 requires less than 0.1 kWh to cover more than a kilometer.
The XL1 emits just 21 g/km of CO2, thanks to its high-tech lightweight design, aerodynamic efficiency, and a plug-in hybrid system consisting of a 47-hp two-cylinder TDI engine, a 27-hp electric motor, a seven-speed DSG dual-clutch automatic transmission, and a lithium-ion battery. The 261 mpg fuel consumption figure is a record that has not been achieved by any other vehicle to date, showing that Volkswagen is redefining what is technically feasible in the automotive industry. The XL1 also has a top speed of 99 mph and can accelerate from 0 to 62 mph in 12.7 seconds.
Conceptually, the XL1 represents the third evolutionary stage of Volkswagen's 1-liter car strategy. When the new millennium was ushered in, Prof. Dr. Ferdinand Piëch, currently Chairman of the Supervisory Board of Volkswagen AG, formulated the visionary goal of putting into production a practical car that had combined fuel consumption of one liter per 100 km (235 mpg). In the two-seat XL1, this vision has become reality.
Despite the tremendous efficiency of the XL1, the engineers and designers successfully came up with a body design which delivers more everyday utility than the two previous prototypes. In the L1, the 1-liter car that was shown in 2002 and 2009, the driver and passenger sat in a tandem arrangement for optimal aerodynamics; in the XL1, the two occupants sit slightly offset, side by side, almost like a conventional vehicle.
The XL1 is 153.1 inches long, 65.6 in wide, and just 45.4 in tall. By comparison, a Volkswagen Polo is slightly longer (156.3 in) and wider (66.2 in), but is significantly taller (57.6 in). Even a purebred sports car like today's Porsche Boxster is 5.1 inches taller. The XL1 will look spectacular going down the highway -- a car of the future, built for today.
About Volkswagen of America, Inc.
Founded in 1955, Volkswagen of America, Inc. is headquartered in Herndon, Virginia. It is a subsidiary of Volkswagen AG, headquartered in Wolfsburg, Germany. Volkswagen's operations in the United States include research and development, parts and vehicle processing, parts distribution centers, sales, marketing and service offices, financial service centers, and its state-of-the-art manufacturing facility in Chattanooga, Tennessee. Volkswagen is one of the world's largest producers of passenger cars and Europe's largest automaker. Volkswagen sells the Beetle, Beetle Convertible, Eos, Golf, Golf R, GTI, Jetta, Jetta SportWagen, Passat, CC, Tiguan, Touareg and Routan vehicles through approximately 600 independent U.S. dealers.
-----
Source: Volkswagen
Discussion
There are 0 discussion items posted.
|
Join the Discussion |
RSS Feeds
Feeds by Content Type
Subscribe to All Content
May 21, 2013
- Siemens' Support For Diversity Through STEM Education is Recognized For 11th Straight Year
- Boston Micromachines Awarded Grant From NASA for Exoplanet Imaging Technology Development
- Interlink Electronics' Human-Machine Interface Solutions Ideal for Rugged Devices Market
- Qupiron, BirdBrain Bring Hummingbird Robotics Kit to Classrooms
- Apriso and LNS Research to Present on Improving Competitiveness
- Honeywell Aerospace Selected By Pilatus For PC-24 Cockpit Avionics
- TI Introduces High Performance Evaluation Module
- iD Tech Camps Debuts Two Summer Programming Courses
- Samsung First to Achieve Sustainability Certification for Smartphones
- "Places2Be" Project to Boost European Leadership Around FD-SOI
- CASAIS Group Selects ZWCAD+ for Real Estate and Architectural Projects
May 20, 2013
- Autodesk and MakerBot Coming to Maker Faire
- Honeywell to Highlight Benefits of RMU Technologies at EBACE
- Littelfuse Hosts Speed2Design TechTalks at NASA
- TIBCO Spotfire Selected by Airbus
May 17, 2013
- Don Bossi Named President of FIRST
- Digi-Key Supports Minnesota State Robotics Tournament
- Coates International Builds Water Splitting Hydrogen Producing Machine
May 16, 2013
- Apriso Recognized as Leading IT Logistics Provider
- Russia Creates Industrial Hubs to Attract International Manufacturers
Most Read Features
- GM Invests in HPC Center for Crash Test Simulations
- STEM Talks Take Root at NEF Regional Dialogues
- Boosting the Workforce, One Veteran at a Time
- Floodgates Open for the Industrial Internet
Most Read Off the Wire
- FIRST Appoints Co-Chairs of the Board of Directors
- Dell Laptops Come to Airbus Cockpits
- Stratasys 3D Printing Supports "Prometheus"
- CIMdata Completes 2013 PLM Market & Industry Forum
- Dassault Systèmes Acquires SIMPOE
- Intelligent Energy Leverages ANSYS for Hydrogen Fuel Cells
- SAP Expands Aerospace & Defense Portfolio
- Maker Faire Announces "Maker Week" in San Mateo County
- Triton and Specialty Materials to Manufacture New Lightweight Fiber Reinforced Aluminum
- Autodesk and NetSuite Partner to Transform Manufacturing in the Cloud
Most Read Blogs
Feature Articles
Floodgates Open for the Industrial Internet
So far, the story surrounding the industrial Internet has been centered around GE, and their plans to infuse their factories with thousands of sensors that will bring big data to manufacturing. But after record-breaking floods from Hurricane Sandy took their toll on New York and New Jersey, environmental and civil engineers have found a new application for the Internet-connected sensor system.
Read more...
GM Invests in HPC Center for Crash Test Simulations
As the cloud becomes an increasingly attractive option for manufacturers with big needs in IT, scalable options such as outsourced data centers have become a must-have for many companies. But General Motors has taken a step in the opposite direction when its $130 million datacenter went online Monday in the suburb of Warren, Michigan.
Read more...
Boosting the Workforce, One Veteran at a Time
When we talk to manufacturers of any size, one concern across the board has been finding engineers with sufficient education and training to do their job. Taking one step toward alleviating this issue is Siemens, who have launched a U.S. job training initiative for veterans, hoping to round out the training of engineers throughout the country.
Read more...
Short Takes
Airbus Enters the Composite Class
May 17, 2013 |
This week, Airbus towed its newest airliner, the A350 XWB, out of its hangar and is poised to roll it into the spotlight of the upcoming Paris Air Show. The A350 XWB has been designed with the goal of surpassing the 787 in fuel efficiency and comfort, and has forgone metal for composite materials to make it happen.
Read more...
3D Printing Meets Augmented Reality
May 16, 2013 |
Sander Veenhof and Joris van Tubergen, of the Netherlands, joined their skills in media art and design to merge 3D printing with augmented reality. They call the result "UltimARker" and like the 3D printer it works with it's been designed for the open source community to give consumers more detailed information about their 3D printer.
Read more...
Could a Driverless Highway Be Around the Corner?
May 16, 2013 |
A recent survey by Cisco Systems found that 57 percent of consumers worldwide are in favor of using driverless cars, with 60 percent approval in the United States, suggesting that the world might be more ready for autonomous vehicles to hit the road than previously thought.
Read more...
White House Puts $200 Million toward Military Manufacturing
May 10, 2013 |
We've known since Obama's State of the Union address this year that 3D printing is a key pillar in the president's plan for America's future in manufacturing, but on Thursday this was made even more clear with the announcement of a competition to create three manufacturing innovation institutes, to be modeled after a government-funded 3D printing center.
Read more...
MIT Robots Tackle IKEA Flat Packs
May 09, 2013 |
Finally, we have someone to look to when we have to assemble our IKEA furniture--or at least something. This week, this solution was showcased at the IEEE International Conference on Robotics and Automation, proving that robots might soon be surpassing humans at yet another task. At least we can gladly hand this one over.
Read more...
Sponsored Whitepapers
Big Data and Big Analytics for Product and Process Quality
03/20/2013 | SAS | This white paper examines how an enterprise-wide quality platform can turn existing data into substantial and sustainable revenue growth and cost savings for global manufacturers. The paper is based on the findings of the IW/SAS Enterprise Quality Survey completed by more than 400 manufacturing executives. The objectives of the survey were to determine concerns about quality among manufacturers; investigate the tools used to measure quality; and examine how using enterprise-wide analysis on quality data improves performance.
TATA Steel Automotive Engineering Depends on Univa
07/19/2011 | Univa | TATA Steel Automotive Engineering’s concern grew when open source Grid Engine support and development was discontinued by Oracle. Grid Engine is a business critical application in their environment. They recognized the likelihood that product enhancements and innovations would cease. Read how TATA Steel Automotive Engineering moved from a self-support solution to Univa Grid Engine. You can get more out of your environment and your budget with Univa Grid Engine.
Featured Events
- June 3, 2013
- June 04, 2013
Kingdom E-Government Summit
Riyadh,
Saudi Arabia
- June 4, 2013
- June 05, 2013
Oil and Gas Event
Accra,
Ghana
- June 5, 2013
- June 05, 2013
NCMS DM SIG Summer Meeting
Rio Rancho, NM
United States
- June 13, 2013
- June 14, 2013
Think Beyond Plastics Conference
Berkeley, CA
United States
- June 18, 2013
- June 19, 2013
American Chemical Manufacturing Summit 2013
Pittsburgh, PA
United States
- July 9, 2013
- July 10, 2013
V2V & V2I for Auto Safety USA 2013
Novi/Detroit, MI
United States
Copyright © 2011-2013 Tabor Communications, Inc. All Rights Reserved.
Digital Manufacturing Report is a registered trademark of Tabor Communications, Inc. Use of this site is governed by our Terms of Use and Privacy Policy.
Reproduction in whole or in part in any form or medium without express written permission of Tabor Communications Inc. is prohibited.
Powered by Xtenit.