|
|
News & information about the fast-moving world
of digital manufacturing, modeling & simulation
November 30, 2012
OGS Yuasa Powers International Space Station
ROSWELL, Ga., Nov. 30 – GS Yuasa Lithium Power, Inc. (GYLP) has been awarded a contract by Pratt & Whitney Rocketdyne (PWR) to provide lithium ion (Li-ion) battery cells to be used on the International Space Station (ISS). PWR will integrate GS Yuasa Li-ion cells into batteries that will replace the nickel-hydrogen (Ni-H2) batteries which currently power the ISS Electrical Power System (EPS) during its eclipse mode. This battery replacement effort is part of an initiative to extend the operation and utilization of the ISS.
"Over the past 3 years, GS Yuasa's technology and manufacturing capability have been thoroughly evaluated by NASA. Following destructive physical analyses of our cells, successful completion of cell qualification and comprehensive audits of our processes and facilities, this award affirms GS Yuasa's uncommon quality, service and value," said Curtis Aldrich, GYLP's director of business development. "We are very happy to continue our relationship with PWR and we are proud to have the opportunity to support the ISS program."
GS Yuasa will supply its LSE134 Li-ion cell which has completed qualification testing for the ISS program. The LSE134 (134Ah nameplate capacity) cell is a member of GS Yuasa's Generation III family of Li-ion cells for space and is ideally suited to the electrical, size and mass requirements of this mission. The LSE134 approximately triples the available energy storage on both a per mass and a per volume basis relative to the existing Ni-H2 battery and is capable of powering critical ISS systems well beyond the required 10-year service life.
"The award of this contract is another example of the confidence the space community has in GS Yuasa's Li-ion cells for space applications," explained GYLP President Bill Moll. "This award follows the successful completion of Phase I of the battery cell procurement which was a highly competitive process. As one of the largest single deployments of lithium ion cells in a space application, the ISS battery replacement project cements GS Yuasa's position as a market leader in stored energy solutions for aerospace systems."
GS Yuasa is a world leader in Li-ion energy storage for space applications. More than 68 orbital vehicles have relied on GS Yuasa Li-ion for a total of more than 1,400,000 watt-hours of storage capacity orbited without failure.
GS Yuasa Lithium Power
GS Yuasa is one of the world's leading battery manufacturers for automotive, telecom, and industrial applications and has produced commercial lead acid batteries for more than one hundred years. GS Yuasa manufactures a variety of specialty battery technologies including Lithium-ion, Nickel-Metal Hydride, Thermal batteries and Silver Zinc.
GS Yuasa Lithium Power, Inc., a United States subsidiary of GS Yuasa, is focused on large format lithium ion battery system support and manufacturing for US customers. Primary products are lithium-ion battery systems for aerospace, defense, commercial, and industrial applications.
-----
Source: GS Yuasa Lithium Power
Discussion
There are 0 discussion items posted.
|
Join the Discussion |
RSS Feeds
Feeds by Content Type
Subscribe to All Content
May 22, 2013
- NASA Calls For Phase II Visionary Advanced Concepts
- Lockheed Martin Conducts Warhead EMD Flight Test
- Honeywell Selects Teachers For Green Boot Camp
- Government Funds Star Tracker Image Sensor for ON Semiconductor
- NComputing Brings Desktop Virtualization to Citrix Users in Manufacturing
- Design Automation Conference to Present Design Yield Panel
- Synaptics Brings High Performance Touchscreens to Mainstream Electronics
May 21, 2013
- Siemens' Support For Diversity Through STEM Education is Recognized For 11th Straight Year
- Boston Micromachines Awarded Grant From NASA for Exoplanet Imaging Technology Development
- Interlink Electronics' Human-Machine Interface Solutions Ideal for Rugged Devices Market
- Qupiron, BirdBrain Bring Hummingbird Robotics Kit to Classrooms
- Apriso and LNS Research to Present on Improving Competitiveness
- Honeywell Aerospace Selected By Pilatus For PC-24 Cockpit Avionics
- TI Introduces High Performance Evaluation Module
- iD Tech Camps Debuts Two Summer Programming Courses
- Samsung First to Achieve Sustainability Certification for Smartphones
- "Places2Be" Project to Boost European Leadership Around FD-SOI
- CASAIS Group Selects ZWCAD+ for Real Estate and Architectural Projects
May 20, 2013
- Autodesk and MakerBot Coming to Maker Faire
- Honeywell to Highlight Benefits of RMU Technologies at EBACE
Most Read Features
- 3D Printing Falls into Gun Control Controversy
- GM Invests in HPC Center for Crash Test Simulations
- STEM Talks Take Root at NEF Regional Dialogues
- Boosting the Workforce, One Veteran at a Time
- Floodgates Open for the Industrial Internet
Most Read Off the Wire
- FIRST Appoints Co-Chairs of the Board of Directors
- Dell Laptops Come to Airbus Cockpits
- Stratasys 3D Printing Supports "Prometheus"
- CIMdata Completes 2013 PLM Market & Industry Forum
- Dassault Systèmes Acquires SIMPOE
- Intelligent Energy Leverages ANSYS for Hydrogen Fuel Cells
- SAP Expands Aerospace & Defense Portfolio
- Maker Faire Announces "Maker Week" in San Mateo County
- Autodesk and NetSuite Partner to Transform Manufacturing in the Cloud
- Digi-Key Supports Minnesota State Robotics Tournament
Most Read Blogs
Feature Articles
Understanding Fluid Flow in Microchannels
The ability to control fluid streams at microscale is of great importance in many domains such as biological processing, guiding chemical reactions, and creating structured materials. Recently, it has been discovered that placing pillars of different dimensions, and at different offsets, allows fluid transformations to “sculpt” fluid streams.
Read more...
Floodgates Open for the Industrial Internet
So far, the story surrounding the industrial Internet has been centered around GE, and their plans to infuse their factories with thousands of sensors that will bring big data to manufacturing. But after record-breaking floods from Hurricane Sandy took their toll on New York and New Jersey, environmental and civil engineers have found a new application for the Internet-connected sensor system.
Read more...
GM Invests in HPC Center for Crash Test Simulations
As the cloud becomes an increasingly attractive option for manufacturers with big needs in IT, scalable options such as outsourced data centers have become a must-have for many companies. But General Motors has taken a step in the opposite direction when its $130 million datacenter went online Monday in the suburb of Warren, Michigan.
Read more...
Short Takes
MIT Improves Carbon-Fiber Composites
May 22, 2013 |
While advanced carbon-fiber composites have been used in the recent years, researchers are searching for materials that are even stronger and lighter. Composites made with carbon fibers coated with carbon nanotubes are being considered because they can be hundreds of times stronger than steel and only one-sixth the weight.
Read more...
NASA to 3D Print the Future of Food
May 22, 2013 |
NASA has awarded a $125,000 grant for a project intended to 3D print food for astronauts in space. The printer will mix together basic nutrients such as oil and protein powder to create the food. It will also allow the user to input their sex, age, and weight so that it can make the food based on the individual's own nutritional needs.
Read more...
Airbus Enters the Composite Class
May 17, 2013 |
This week, Airbus towed its newest airliner, the A350 XWB, out of its hangar and is poised to roll it into the spotlight of the upcoming Paris Air Show. The A350 XWB has been designed with the goal of surpassing the 787 in fuel efficiency and comfort, and has forgone metal for composite materials to make it happen.
Read more...
3D Printing Meets Augmented Reality
May 16, 2013 |
Sander Veenhof and Joris van Tubergen, of the Netherlands, joined their skills in media art and design to merge 3D printing with augmented reality. They call the result "UltimARker" and like the 3D printer it works with it's been designed for the open source community to give consumers more detailed information about their 3D printer.
Read more...
Could a Driverless Highway Be Around the Corner?
May 16, 2013 |
A recent survey by Cisco Systems found that 57 percent of consumers worldwide are in favor of using driverless cars, with 60 percent approval in the United States, suggesting that the world might be more ready for autonomous vehicles to hit the road than previously thought.
Read more...
Sponsored Whitepapers
Big Data and Big Analytics for Product and Process Quality
03/20/2013 | SAS | This white paper examines how an enterprise-wide quality platform can turn existing data into substantial and sustainable revenue growth and cost savings for global manufacturers. The paper is based on the findings of the IW/SAS Enterprise Quality Survey completed by more than 400 manufacturing executives. The objectives of the survey were to determine concerns about quality among manufacturers; investigate the tools used to measure quality; and examine how using enterprise-wide analysis on quality data improves performance.
TATA Steel Automotive Engineering Depends on Univa
07/19/2011 | Univa | TATA Steel Automotive Engineering’s concern grew when open source Grid Engine support and development was discontinued by Oracle. Grid Engine is a business critical application in their environment. They recognized the likelihood that product enhancements and innovations would cease. Read how TATA Steel Automotive Engineering moved from a self-support solution to Univa Grid Engine. You can get more out of your environment and your budget with Univa Grid Engine.
Featured Events
- June 3, 2013
- June 04, 2013
Kingdom E-Government Summit
Riyadh,
Saudi Arabia
- June 4, 2013
- June 05, 2013
Oil and Gas Event
Accra,
Ghana
- June 5, 2013
- June 05, 2013
NCMS DM SIG Summer Meeting
Rio Rancho, NM
United States
- June 13, 2013
- June 14, 2013
Think Beyond Plastics Conference
Berkeley, CA
United States
- June 18, 2013
- June 19, 2013
American Chemical Manufacturing Summit 2013
Pittsburgh, PA
United States
- July 9, 2013
- July 10, 2013
V2V & V2I for Auto Safety USA 2013
Novi/Detroit, MI
United States
Copyright © 2011-2013 Tabor Communications, Inc. All Rights Reserved.
Digital Manufacturing Report is a registered trademark of Tabor Communications, Inc. Use of this site is governed by our Terms of Use and Privacy Policy.
Reproduction in whole or in part in any form or medium without express written permission of Tabor Communications Inc. is prohibited.
Powered by Xtenit.