ISC
Published in collaboration with NCMS
Digital Manufacturing Report

News & information about the fast-moving world
of digital manufacturing, modeling & simulation

Language Flags

Tool and Dice


For the past 45 years, people have converged in ever-increasing numbers to spend an August weekend celebrating all things game-related. The event is Gen Con (short for “Geneva Convention,” as it was originally held in Lake Geneva, Wisconsin in the late sixties), and it’s gamer paradise. These days Gen Con is held in Indianapolis, and boasts an attendance of about 40,000. Miniature-based wargames, board games, tabletop roleplaying games, video games, card games… you name it, it’s represented, along with assorted other hobbies traditionally beloved of gamers.

I’ve been going for years. A chance to hang out with old friends and enjoy all the stuff we used to have much more time for. Plus the event is sort of a pilgrimage, where we can cut loose and get our inner geek on in entirely friendly surroundings. Gen Con is doubtless overwhelming for those who don’t consider themselves part of the gamer culture, while gamers revel in the opportunity to totally immerse in it for a few days. Only at Gen Con are you likely to pass a trio of dudes dressed in Imperial Stormtrooper armor from the waist up and Scottish Highlander kilts from the waist down. In most bars the world over you’ll hear people arguing about politics or professional football; at Gen Con, the table next to yours is probably engaged in discussion about encumbrance rules or whether the D20 system’s statistical shortcomings should be corrected in 5E, or how the abolishment of ThAC0 would make Gygax turn in his grave – assuming, of course, he was subject to magic from an evil-aligned cleric of fifth level or higher.

Any non-gamer standing in the gazillion-square-foot exhibit hall at Gen Con would feel similarly lost. After all, there’s an eight foot statue of a giant spider lady over there (that’s just Lolth, arachno-goddess of the Drow). There’s a gaggle of people dressed in… like… a combination of dusty nineteenth-century eveningwear and gas masks with copper gears on them (it’s Steampunk, it’s a thing). The guy at that booth is selling a playing card for $1,200 (“Time Walk.” Very rare. An extra turn for two Blue mana!).

Honestly, though, I feel as confused when I’m in a meeting with more than one engineer. They’re always talking about “meshing things,” whatever that means. Yesterday on a conference call, four of them got into a rather tense argument about heat exchangers, for crying out loud. To a manufacturer, a “die” is… I’m not sure what it is. To a gamer, a “die” is a plastic polyhedron that you roll to generate a random number. You know, dice.

Since I’ve got a foot in both worlds I can appreciate both cultures, and we should all appreciate that every one has its own idiosyncrasies. Meanwhile, another thing that’s worth considering, should you ever stand near the spider lady in that big exhibit hall: everything there, from the digitally-sculpted Mallifaux miniatures to that Time Walk card, it was all manufactured. Someone designed it and someone built it, and now here it is in Indianapolis, making 40,000 people very happy.

The digital manufacturing transition is as much a cultural shift as a technological one, so there’s something to be said for pausing and taking a look around and thinking about how two different worlds – like the world of gaming and the world of product design – are often more connected than disconnected, despite how they might initially seem. Manufacturers are very used to doing things a certain way, and adopting revolutionary new tools, tools that even require a new way of thinking about how stuff is made, is no simple matter. It’s not just a technical transition. But adopt them they will, just as D&D players migrate between editions every few years, despite the often staggering mechanical changes.

The differences between manufacturing culture and gaming culture, or any two cultures really, are a lot smaller than it might initially seem. It’s true that Lolth the Spider Queen has no place on a factory floor, but she was born on one. And a whole lot of people who spend most days working on factory floors also spend a weekend at Gen Con in her company.

RSS Feeds

Subscribe to All Content

Most Recent Blogs


Feature Articles

Aircraft Mock-ups Emerge from Gulfstream’s 3D CAVE

Simulations may be increasingly taking advantage of HPC to become more and more sophisticated, but the way those mountains of data are displayed don’t always keep up in terms of staying on the cutting edge. But one avenue for reviewing digital designs, called a cave automatic virtual environment (CAVE), looks to be making up for this trend by combining engineers’ modeling information with virtual reality.
Read more...

Understanding Fluid Flow in Microchannels

The ability to control fluid streams at microscale is of great importance in many domains such as biological processing, guiding chemical reactions, and creating structured materials. Recently, it has been discovered that placing pillars of different dimensions, and at different offsets, allows fluid transformations to “sculpt” fluid streams.
Read more...

Floodgates Open for the Industrial Internet

So far, the story surrounding the industrial Internet has been centered around GE, and their plans to infuse their factories with thousands of sensors that will bring big data to manufacturing. But after record-breaking floods from Hurricane Sandy took their toll on New York and New Jersey, environmental and civil engineers have found a new application for the Internet-connected sensor system.
Read more...

Short Takes

3D-Printed Airway Saves Life

May 23, 2013 | In the wake of plastic gun stories, a unique use case for 3D printing helps demonstrate that the additive manufacturing technology's potential to save lives deserves its own place in the spotlight. Now, doctors at C.S. Mott Children's Hospital in Ann Arbor have combined medical expertise with 3D printing's flexibility to save a three-month old.
Read more...

Robotic Ants May Aid in Search and Rescue Missions

May 23, 2013 | Researchers have been studying fire ants hoping to learn about their underground navigation skills. They want to apply their findings to making robots that will be able to assist in search and rescue missions for people trapped underground.
Read more...

MIT Improves Carbon-Fiber Composites

May 22, 2013 | While advanced carbon-fiber composites have been used in the recent years, researchers are searching for materials that are even stronger and lighter. Composites made with carbon fibers coated with carbon nanotubes are being considered because they can be hundreds of times stronger than steel and only one-sixth the weight.
Read more...

NASA to 3D Print the Future of Food

May 22, 2013 | NASA has awarded a $125,000 grant for a project intended to 3D print food for astronauts in space. The printer will mix together basic nutrients such as oil and protein powder to create the food. It will also allow the user to input their sex, age, and weight so that it can make the food based on the individual's own nutritional needs.
Read more...

Airbus Enters the Composite Class

May 17, 2013 | This week, Airbus towed its newest airliner, the A350 XWB, out of its hangar and is poised to roll it into the spotlight of the upcoming Paris Air Show. The A350 XWB has been designed with the goal of surpassing the 787 in fuel efficiency and comfort, and has forgone metal for composite materials to make it happen.
Read more...

Sponsored Whitepapers

Big Data and Big Analytics for Product and Process Quality

03/20/2013 | SAS | This white paper examines how an enterprise-wide quality platform can turn existing data into substantial and sustainable revenue growth and cost savings for global manufacturers. The paper is based on the findings of the IW/SAS Enterprise Quality Survey completed by more than 400 manufacturing executives. The objectives of the survey were to determine concerns about quality among manufacturers; investigate the tools used to measure quality; and examine how using enterprise-wide analysis on quality data improves performance.

TATA Steel Automotive Engineering Depends on Univa

07/19/2011 | Univa | TATA Steel Automotive Engineering’s concern grew when open source Grid Engine support and development was discontinued by Oracle. Grid Engine is a business critical application in their environment. They recognized the likelihood that product enhancements and innovations would cease. Read how TATA Steel Automotive Engineering moved from a self-support solution to Univa Grid Engine. You can get more out of your environment and your budget with Univa Grid Engine.

Intersect360 HPC500 Conferences and Events

Featured Events








Copyright © 2011-2013 Tabor Communications, Inc. All Rights Reserved.
Digital Manufacturing Report is a registered trademark of Tabor Communications, Inc. Use of this site is governed by our Terms of Use and Privacy Policy.
Reproduction in whole or in part in any form or medium without express written permission of Tabor Communications Inc. is prohibited.
Powered by Xtenit.