Published in collaboration with NCMS
Digital Manufacturing Report

News & information about the fast-moving world
of digital manufacturing, modeling & simulation

Language Flags

Laser Cutting Land Rover Seats at CabAuto

Automotive customers who purchase Jaguars, Aston Martins or Land Rovers tend to be somewhat fussy when it comes to their vehicle’s details.  Seats, interior trim, headliners, carpets – all have to be top quality.

CabAuto, a U.K. company located in Tipton, West Midlands, is one of the manufacturers supplying these high-end auto companies with components build to exacting standards.  In the case study below, you’ll learn how CabAuto moved its laser cutting operations in-house and uses some versatile CAD/CAM software to nest the parts and create the necessary CNC programs to cut the steel and aluminum used in Land Rover seating components.

Land Rover seat uncovered

CabAuto chose Lantek Expert CADCAM when it needed to move its laser cutting processes in house. Based in Tipton, West midlands, CabAuto,, specializes in the manufacture of seating and interior trim for automotive, rail and marine applications. In particular it has produced the parcel shelf for the Jaguar XF, molded carpets and headliners for Aston Martin and seating, headliners and bespoke storage solutions for the Land Rover Defender.

Previously the company subcontracted all its laser cutting operations, but for commercial reasons needed to start cutting parts at its own factory. The solution it chose was a Bystronic laser from World Machinery and Lantek Expert CADCAM to nest the parts and create the CNC programs.

Lee Macdonald, Manufacturing Engineer explains, “The principal project which the Lantek system is used on is the manufacture of seating components for the Land Rover Defender making between 10,000 and 15,000 parts each week. Material ranges from 1 to 8mm thick in steel, aluminium and hypress steel. Once the components have been cut the parts are formed, welded and assembled, to make the seat frames. Due to the fast moving and cost sensitive nature of our business, we need to achieve rapid and reliable CNC programming and high levels of material utilization.”

Lantek Expert allows both automatic and manual nesting and its parallel processing technology enables it to take advantage of the latest multi-processor computer hardware, producing speed improvements of at least 30%. During nesting, the system considers material type and thickness and can manage kits of parts, nesting parts within one another if possible, and manage the reuse of offcuts, through a database, to optimize material utilization. Lee Macdonald adds, “The automatic nesting is very useful indeed. It automatically arranges our parts in the most efficient way. For offcuts, Lantek Expert labels these so that they can be easily identified for the nesting of smaller batches of components, maximizing our efficiency.”

During the cutting process, Lantek Expert can create micro joints to hold parts into the sheet for easier manipulation and unloading, and it can also perform common line cutting where appropriate. By using these features, companies can save both material and time, by reducing wasted moves on the laser, increasing the number of parts in a sheet, and speeding up the handling of components once they have been cut. If required, the software can also mark each part during cutting so that it can be easily identified during subsequent assembly operations. New in the latest version of the software, is the ability to string together several commands enabling cutting to be activated with one mouse click. Whole sequences from importing CAD data to nesting, material selection, programming, and report generation can all be joined together into one operation. CabAuto dynamically nests its requirements for the week each Monday morning. Lee Macdonald explains, “Lantek saves a lot of programming time as you press one button and the nesting is done for you. It saves us having to have a full time person manually nesting our weekly requirement of parts. Our laser operative receives the schedule on Monday morning, which is between 10,000 and 15,000 components for the week, by early afternoon programming is complete and time can be spent on other productive tasks.”

Lantek Expert’s intuitive and ergonomic interface makes operation and training fast and easy. Lee Macdonald says, “The installation and training provided by Lantek was excellent. The training was thorough and enjoyable and broken down into digestible sections, without any fancy jargon. We have three people fully trained in Lantek Expert and we all find it very straightforward to use and we understand and can utilize all its features. After sales support is excellent too, whenever we have a query there is always someone on the other end of the phone to resolve your issue.”

Around half of the metalwork at CabAuto is cut by laser and goes through Lantek Expert. Lee Macdonald says, “Without it, it would be difficult to make the volume of parts we produce so easily.”

Full story at Lantek

RSS Feeds

Subscribe to All Content

Feature Articles

Titan Puts a New Spin on GE’s Wind Turbine Research

Unlike traditional energy sources, wind is a trouble to tame, which has led GE to turn to advanced simulations at Oak Ridge National Laboratory to put the technology on track to cover 12 percent of the world's energy production.

Lighting a Fire Under Combustion Simulation

Combustion simulation might seem like the ultimate in esoteric technologies, but auto companies, aircraft firms and fuel designers need increasingly sophisticated software to serve the needs of 21st century engine designs. HPCwire recently got the opportunity to take a look at Reaction Design, one of the premier makers of combustion simulation software, and talk with its CEO, Bernie Rosenthal.

D-Wave Sells First Quantum Computer

On Wednesday, D-Wave Systems made history by announcing the sale of the world's first commercial quantum computer. The buyer was Lockheed Martin Corporation, who will use the machine to help solve some of their "most challenging computation problems." D-Wave co-founder and CTO Geordie Rose talks about the new system and the underlying technology.

Short Takes

Local Motors and ORNL Partner for Automotive Manufacturing

Jan 24, 2014 | Local Motors, a vehicle innovator, and the U.S. Department of Energy’s Oak Ridge National Laboratory (ORNL) have announced a new partnership that they hope will bring change to the automotive industry.

Advanced Modeling Benefits Wind Farms

May 25, 2011 | Advanced computing resources optimize the site selection of wind farms.

Not Your Parents' CFD

Oct 13, 2010 | Outdated beliefs stand in the way of greater CFD adoption.

Manufacturers Turn to HPC to Cut Testing Costs

Oct 06, 2010 | Supercomputing saves money by reducing the need for physical testing.

HPC Technology Makes Car Safety Job 1

Aug 05, 2010 | Automakers turn to computer simulations to design safer vehicles.

Sponsored Whitepapers

Technical Computing for a New Era

07/30/2013 | IBM | This white paper examines various means of adapting technical computing tools to accelerate product and services innovation across a range of commercial industries such as manufacturing, financial services, energy, healthcare, entertainment and retail. No longer is technically advanced computing limited to the confines of big government labs and academic centers. Today it is available to a wide range of organizations seeking a competitive edge.

The UberCloud HPC Experiment: Compendium of Case Studies

06/25/2013 | Intel | The UberCloud HPC Experiment has achieved the volunteer participation of 500 organizations and individuals from 48 countries with the aim of exploring the end-to-end process employed by digital manufacturing engineers to access and use remote computing resources in HPC centers and in the cloud. This Compendium of 25 case studies is an invaluable resource for engineers, managers and executives who believe in the strategic importance of applying advanced technologies to help drive their organization’s productivity to perceptible new levels.

Conferences and Events

Featured Events

Copyright © 2011-2014 Tabor Communications, Inc. All Rights Reserved.
Digital Manufacturing Report is a registered trademark of Tabor Communications, Inc. Use of this site is governed by our Terms of Use and Privacy Policy.
Reproduction in whole or in part in any form or medium without express written permission of Tabor Communications Inc. is prohibited.
Powered by Xtenit.