ISC
Published in collaboration with NCMS
Digital Manufacturing Report

News & information about the fast-moving world
of digital manufacturing, modeling & simulation

Language Flags
Translation Disclaimer

Subscribe | Sign In

March 20, 2012

Seagate Reaches 1 Terabit Per Square Inch Milestone in Hard Drive Storage with New Technology Demonstration

CUPERTINO, Calif., March 20 – Seagate has become the first hard drive maker to achieve the milestone storage density of 1 terabit (1 trillion bits) per square inch, producing a demonstration of the technology that promises to double the storage capacity of today’s hard drives upon its introduction later this decade and give rise to 3.5-inch hard drives with an extraordinary capacity of up to 60 terabytes over the 10 years that follow. The bits within a square inch of disk space, at the new milestone, far outnumber stars in the Milky Way, which astronomers put between 200 billion and 400 billion.

Seagate reached the landmark data density with heat-assisted magnetic recording (HAMR), the next-generation recording technology. The current hard drive technology, Perpendicular Magnetic Recording (PMR), is used to record the spectrum of digitized data – from music, photos, and video stored on home desktop and laptop PCs to business information housed in sprawling data centers – on the spinning platters inside every hard drive. PMR technology was introduced in 2006 to replace longitudinal recording, a method in place since the advent of hard drives for computer storage in 1956, and is expected to reach its capacity limit near 1 terabit per square inch in the next few years.

“The growth of social media, search engines, cloud computing, rich media and other data-hungry applications continues to stoke demand for ever greater storage capacity,” said Mark Re, senior vice president of Heads and Media Research and Development at Seagate. “Hard disk drive innovations like HAMR will be a key enabler of the development of even more data-intense applications in the future, extending the ways businesses and consumers worldwide use, manage and store digital content.”

Hard drive manufacturers increase areal density and capacity by shrinking a platter’s data bits to pack more within each square inch of disk space. They also tighten the data tracks, the concentric circles on the disk’s surface that anchor the bits. The key to areal density gains is to do both without disruptions to the bits’ magnetization, a phenomenon that can garble data. Using HAMR technology, Seagate has achieved a linear bit density of about 2 million bits per inch, once thought impossible, resulting in a data density of just over 1 trillion bits, or 1 terabit, per square inch – 55 percent higher than today’s areal density ceiling of 620 gigabits per square inch.

The maximum capacity of today’s 3.5-inch hard drives is 3 terabytes (TB), at about 620 gigabits per square inch, while 2.5-inch drives top out at 750 gigabytes (GB), or roughly 500 gigabits per square inch. The first generation of HAMR drives, at just over 1 terabit per square inch, will likely more than double these capacities – to 6TB for 3.5-inch drives and 2TB for 2.5-inch models. The technology offers a scale of capacity growth never before possible, with a theoretical areal density limit ranging from 5 to 10 terabits per square inch – 30TB to 60TB for 3.5-inch drives and 10TB to 20TB for 2.5-inch drives.

The 1 terabit per square inch demonstration extends a long line of storied technology firsts for Seagate, including:

  • 1980: ST-506, the first hard drive, at 5.25 inches, small enough to be widely deployed in early microcomputers, the precursor of the modern PC. The 5 megabyte drive cost $1,500.
  • 1992: The first 7200RPM hard drive, a Barracuda® drive
  • 1996: The first 10,000RPM hard drive, a Cheetah® drive
  • 2000: The first 15,000RPM drive, also a Cheetah hard drive
  • 2006: Momentus® 5400.3 drive, a 2.5-inch laptop drive and the world’s first drive to feature perpendicular magnetic recording technology
  • 2007: Momentus FDE (Full Disk Encryption) drive, the industry’s first self-encrypting hard drive
  • 2010: Momentus XT drive, the first solid state hybrid hard drive, combining traditional spinning media with NAND flash, to deliver speeds rivaling solid state drives (SSDs)

Seagate achieved the 1 terabit per square inch breakthroughs in materials science and near-field optics at its heads and media research and development centers in Bloomington, Minnesota, and Fremont, California.

http://seagate.com/twitter
http://seagate.com/facebook
http://media.seagate.com

About Seagate

Seagate is a worldwide leader in hard disk drives and storage solutions. Learn more at http://www.seagate.com.

-----

Source: Seagate

RSS Feeds

Feeds by Content Type

Subscribe to All Content

Most Recent Blogs


Feature Articles

GM Invests in HPC Center for Crash Test Simulations

As the cloud becomes an increasingly attractive option for manufacturers with big needs in IT, scalable options such as outsourced data centers have become a must-have for many companies. But General Motors has taken a step in the opposite direction when its $130 million datacenter went online Monday in the suburb of Warren, Michigan.
Read more...

Boosting the Workforce, One Veteran at a Time

When we talk to manufacturers of any size, one concern across the board has been finding engineers with sufficient education and training to do their job. Taking one step toward alleviating this issue is Siemens, who have launched a U.S. job training initiative for veterans, hoping to round out the training of engineers throughout the country.
Read more...

STEM Talks Take Root at NEF Regional Dialogues

The National Engineering Forum (NEF) has developed a three-pronged approached in keeping the US engineering workforce competitive, for which it hopes to help spread awareness through a series of regional dialogue events held throughout the country.
Read more...

Short Takes

Airbus Enters the Composite Class

May 17, 2013 | This week, Airbus towed its newest airliner, the A350 XWB, out of its hangar and is poised to roll it into the spotlight of the upcoming Paris Air Show. The A350 XWB has been designed with the goal of surpassing the 787 in fuel efficiency and comfort, and has forgone metal for composite materials to make it happen.
Read more...

3D Printing Meets Augmented Reality

May 16, 2013 | Sander Veenhof and Joris van Tubergen, of the Netherlands, joined their skills in media art and design to merge 3D printing with augmented reality. They call the result "UltimARker" and like the 3D printer it works with it's been designed for the open source community to give consumers more detailed information about their 3D printer.
Read more...

Could a Driverless Highway Be Around the Corner?

May 16, 2013 | A recent survey by Cisco Systems found that 57 percent of consumers worldwide are in favor of using driverless cars, with 60 percent approval in the United States, suggesting that the world might be more ready for autonomous vehicles to hit the road than previously thought.
Read more...

White House Puts $200 Million toward Military Manufacturing

May 10, 2013 | We've known since Obama's State of the Union address this year that 3D printing is a key pillar in the president's plan for America's future in manufacturing, but on Thursday this was made even more clear with the announcement of a competition to create three manufacturing innovation institutes, to be modeled after a government-funded 3D printing center.
Read more...

MIT Robots Tackle IKEA Flat Packs

May 09, 2013 | Finally, we have someone to look to when we have to assemble our IKEA furniture--or at least something. This week, this solution was showcased at the IEEE International Conference on Robotics and Automation, proving that robots might soon be surpassing humans at yet another task. At least we can gladly hand this one over.
Read more...

Sponsored Whitepapers

Big Data and Big Analytics for Product and Process Quality

03/20/2013 | SAS | This white paper examines how an enterprise-wide quality platform can turn existing data into substantial and sustainable revenue growth and cost savings for global manufacturers. The paper is based on the findings of the IW/SAS Enterprise Quality Survey completed by more than 400 manufacturing executives. The objectives of the survey were to determine concerns about quality among manufacturers; investigate the tools used to measure quality; and examine how using enterprise-wide analysis on quality data improves performance.

TATA Steel Automotive Engineering Depends on Univa

07/19/2011 | Univa | TATA Steel Automotive Engineering’s concern grew when open source Grid Engine support and development was discontinued by Oracle. Grid Engine is a business critical application in their environment. They recognized the likelihood that product enhancements and innovations would cease. Read how TATA Steel Automotive Engineering moved from a self-support solution to Univa Grid Engine. You can get more out of your environment and your budget with Univa Grid Engine.

Intersect360 HPC500 Conferences and Events

Featured Events








Home | Features | News | Blogs | Events | Whitepapers | Contact Us | About DM-Report | Editorial Guidelines

Copyright © 2011-2013 Tabor Communications, Inc. All Rights Reserved.
Digital Manufacturing Report is a registered trademark of Tabor Communications, Inc. Use of this site is governed by our Terms of Use and Privacy Policy.
Reproduction in whole or in part in any form or medium without express written permission of Tabor Communications Inc. is prohibited.
Powered by Xtenit.